DC-DC Boost 150W Module

Overview

This adjustable DC-DC boost converter can easily provide the necessary power output for your embedded systems and it is a convenient solution for most of your project that requires high power.

It can be used for adjustable power inverters, boost chargers, universal power supply for embedded systems and more.

Specifications

• Input Voltage: 10 V to 32 V
• Input Current: 10 A (max)
• Output Voltage: 12 V to 35 V (adjustable)
• Output Current: 6 A (max)
• Output Power: 100 W (with natural cooling), 150 W (with cooler fan)
• No Load Current: 25 mA (typically)
• Efficiency: 94% (measurement conditions: 16 V input voltage, 19 V output voltage, 2.5 A current)
• Operating Temperature: -40° C to +85° C
• Dimensions: 65 x 47 x 23.5 mm

Note: The input voltage of the boost converter cannot be higher than the output voltage.

Scope of Application

1. DIY an output adjustable car power supply, you only need to connect your 12V power supply at the input, the output voltage can be adjusted freely (14-35V), but the output voltage cannot be lower than the input voltage.

2. Universal car laptop power supply. The input is connected to your 12V power supply, and the output is adjusted to the voltage of your laptop to work.

3. To supply power to your electronic equipment, as long as the voltage is adjusted to the voltage you need and the current does not exceed the rated current, it can work normally.

4. The system front-end power supply, when you are working on a project when the input is 10-18V, and your system board needs a power supply of about 24V and its power is very large, the power of ordinary DC-DC modules is too high. Small, can work directly on the machine without debugging, easily achieve high efficiency and high power boost.

Don't delay, buy today.

Add to cart now!