STM32F103C8T6 ARM Development Board

Overview

This STM32F103C8T6 ARM Development Board is based on the main chip ARM core board. It is one of on board most basic MCU- based circuits, such as crystal oscillator circuit, USB power management circuit and USB interface. The core board leads to all I / O port resources with SWD simulation debugging download interface.

The micro controller is a powerful one and can achieve a maximum operating frequency of 72 MHz. The chip also includes a RTC module that works at a 32,768 kHz frequency useful to store the time and date for proper system operation. The chip also has backup registers that can be permanently powered by the special VBAT pin.

With this development plaque you can design interesting electronics projects. Compared to an Arduino development pad, it also offers much greater performance. Starting with operating frequency, flash memory and SRAM, the capabilities are much higher. The product also offers many communication interfaces.

Specifications

• Operating voltage: 2.0 - 3.6 V
• ARM Cortex M3 Processor
• Frequency: 72 MHz
• Flash memory: 64 kB
• SRAM memory: 20 kB
• SPI interfaces: 2
• USART interfaces: 3
• I2C interfaces: 2
• CAN interfaces: 1
• 40 GPIO pins
• 10 ADC 12/16 bit ports
• 3 normal timers and an advanced one
• Debugging JTAG / SWD interfaces
• RTC clock
• VBAT pin for RTC
• 3.3 V regulator at 300 mA
• Compatible with Keil or IAR compiler;
• Programmable via JTAG or USART1 interface.
• Dimensions: 53.34 x 22.86 mm.

Example of programming.

Don't delay, buy today.

Add to cart now!