LM2596HV DC-DC Step Down Module

Overview

The product is suitable for your projects if you need to power a circuit that is capable of driving a 3 A load and converts input voltage between 5 V to 60 V. This is suitable for applications which need a highly efficient power converter.

Specifications

• Input voltage: 4.5-60V (Note: it cannot work for a long time if it is higher than 50v)

• Adjustment method: first correctly connect the input power supply ( between 4.5-60V ), then use a multimeter to monitor the output voltage and adjust the potentiometer (generally clockwise to boost, reverse clockwise to buck)

• Output voltage : (3-35V) continuously adjustable (no-load debugging is recommended)

• Differential pressure: at least 1.5V

• Output current: rated current 2A, no more than 3A

• Output power: no more than 15W

• Conversion efficiency: 92% or less (the higher the output voltage, the higher the efficiency)

• The static power consumption is only about 6mA.

• Wiring method: soldering, after adding pins, it can be soldered directly on the PCB.

• Working temperature: industrial grade (-40℃ to +85℃)

• Load regulation rate : ±1%

• Voltage adjustment rate : ±0.5% (in order to achieve that the output voltage will be higher when there is no load, but as long as there is a 1MA load, the output voltage will be normal, without affecting the function, please rest assured.)

• Short circuit protection: current limit, overheat protection, self-recovery.

Advantages: use of double-sided PCB board thick black oil quality, all use imported SMD aluminum electrolytic capacitors , high-Q inductor power . In addition, each board has undergone rigorous technical testing, and all of them are packaged in an independent antistatic protective bag.

Specially designed 2 screw fixing holes. The four input and output pads are all provided with pin header fixing holes;

IN+ input positive IN- input negative!

OUT+ output positive OUT- output negative

Don't delay, buy today.

Add to cart now!